heat exchanger tubes
"
Tubulação alta do PESO 0.50mm Inconel 601 da resistência ASTM B622
Inconel 600 718 825 Tubing Pipe Outer Diameter : 3.18mm-101.60mm Wall Thickness : 0.50mm-20.00mm Length :Normally fixed length 6m, can as per customer’s requirement Standard : ASTM B163; ASTM B167; ASTM B444; ASTM B622 ect Material Grade : Alloy 800 / 800H / 800HT, Alloy 625/UNS N06625, Alloy 600/UNS N06600, Alloy601/UNS N06601, Alloy 800/UNS N08800, Alloy 825/UNS N08825, Alloy400/UNS N04400; etc Application Chemical and petrochemical process piping heat exchangers furnace
Tubulação de aço Incoloy de liga da resistência ácida 825 ASTM B423 ASTM B829 ASTM B705
Alloy Steel Pipe Incoloy seamless steel pipe 825 Chemical composition: Ni %:38-46 Cr %:19.5-23.5 Fe:Remained. C%:0.025 Mn%:1.0 Si%:0.5 Cu%:1.5-3.0 Mo%:2.5-3.5 Al%:0.2 Ti%:0.6-1.2 P%:0.02 S%:0.01 Characteristic: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion. Good resistance to oxidatiom and non-oxidizing acidic heat energy. At room temperature and temperatures up to 550℃ have the good mechanical properties. Have certified
Tubulação sem emenda de aço inoxidável capilar de lustro Astm de recozimento brilhante A213
Bright Annealing Seamless Stainless Steel Capillary Tube Commodity name Small diameter bright annealing seamless stainless steel capillary tube Process method cold rolled/cold drawn Stainless steel grades TP304/304L, TP310/S,TP316/316L, TP317L, TP321, TP347/H S31803/2205, 904L Standard ASTM A213, A312, A511, A270, A269, A789, A790, DIN17456, DIN17458, JIS G3463 Size 6 x 0.3 ..... Testing Chemical Analysis. Hydrostatic or Nondestructive Electric Test, Intergranular Corrosion
A agulha descartável dos SS do tubo de aço pequeno da precisão Blunts ISO 9001 ASTM A269
¼" ½ - 2" Length Disposable SS Needle Blunts Disposable Dispensing Needle Blunts Syringes Needle Tube Syringes Process method cold rolled/cold drawn Stainless steel grades TP304/304L, TP310/S,TP316/316L, TP317L, TP321, TP347/H S31803/2205, 904L Standard ASTM A213, A312, A511, A270, A269, A789, A790, DIN17456, DIN17458, JIS G3463 Size 0.8x0.1...... Testing Chemical Analysis. Hydrostatic or Nondestructive Electric Test, Intergranular Corrosion Test, Flaring Test, Flattening
Tubulação de aço sem emenda soldada titânio TA3 TA9 TA10 de liga espessura de parede de 0,5 - de 2mm
Titanimu Alloy Steel Pipe GB/T 3625—95 for Heat Exchanger and Cold Condensors Material : Titanimu alloy steel, Characteristic of the material:e High strength ,low density,good mechanical property ,good tenacity.good corrosion resistanc. It can be made by seamless and welded.and widely apply in power generation,Aerospace,oil and gas ,chemical processing. Available size list: Cold drawn Seamless pipes with Ti and Ti alloy grade condition Diameter/mm Wall thickness /mm 0.5 0.6 0
Comprimento estirado a frio da tubulação de aço ASTM A335 12,7 - 177.8mm OD 4 - 12.5m de liga
Alloy Pipe ASTM A335 P5, P9, P11, P22, P91 Alloy steel pipes are used in the energy industry for high temperature and very low-temperature service (cryogenic), or for applications with very high pressures. ASTM A335 alloy steel pipes fit ASTM A234 WPx series buttweld fittings (WP5, WP9, WP91) and A182 Fx forged fittings and flanges (A182 F5, F9, F11, F22, F91). All these materials have similar chemical and mechanical properties and can be joined or welded. Size range: O.D.:6
ASTM A524 Tubo de aço com baixo teor de carbono sem costura 8-426 mm OD
A524 Seamless Low-Carbon Steel Pipe for Atmospheric and Lower Temperatures 1. Material Overview ASTM A524 (also designated A524/A524M-21 in its latest revision) defines the standard specification for seamless low-carbon (killed) steel pipe , primarily intended for service at atmospheric and lower temperatures , covering nominal pipe sizes (NPS) from 1/8″ to 26″ with wall thickness per ANSI B36.10 The steel is required to be killed steel , produced via open-hearth, electric
Tubulação de aço especial inoxidável sem emenda soldada para a construção da maquinaria
Wall Thickness with 1.0 to 3.0mm, Mirror and Satin Finish : MATERIAL 201/304/316 STANDARD ASTM A554 PLACE OF ORIGIN CHINA SIZE 20 x 40 to 60 x 120mm THICKNESS 1.0~3.0 mm LENGTH 6m or as customers' request SURFACE 180G, 320G, 400G Satin / Hairline, 400G, 500G, 600G, 800G Mirror finish, Brushed, TIN titanium plated COLOR NON TEST Squash test, Extended test, Water pressure test, Crystal rot test, Heat treatment, NDT DELIVERY 7-30 days after receiving deposit or L/C depending on
Tubulação de aço OD 6 - 450mm de liga de ASTM A335 para serviços de alta temperatura
ASTM A335 Alloy Steel Pipe OD 6 - 450mm for High Temperature Services ASTM A335 Seamless ferritic and alloy steel pipe for high temperature service Applications: for Boilers,Superheaters,Heat-Exchangers Size range: O.D.:6-420mm W.T.:1-50mm L: according to customer requirement Astm a103 ASTM A335 ferritic alloy steel seamless steel pipe Steel Grade and Chemical Compositions: Steel Grade C Mn P S Si Cr Mo max max max max max min P5 0.15 0.30-0.60 0.025 0.025 0.50 4.00-6.00 0.45
